Chips Don’t Float: Rebuilding the PCB Base Behind Secure Electronics
Summit Interconnect’s Shane Whiteside joins Alex Krutz to discuss PCB manufacturing, secure electronics, and rebuilding America’s production capacity

Hello, it’s Alex Krutz. Welcome to The Factory Doctor. I’m here with Shane Whiteside from Summit Interconnect. Shane, welcome to the show.
Shane Whiteside: Thank you, Alex. Thank you for having me today.
Alex Krutz: Great. Let me tell the audience a little bit about you. You’ve been the founder and CEO of Summit Interconnect for the last 10 years, and it’s been private equity backed that entire time. Usually, businesses go through a period of growth, being owned privately, and then go into private equity. It’ll be great to hear a little bit about that experience.
Previously, you were the chief operating officer of TTM and were around much of that growth. That’s a really famous name in the industry. Thirty years in the printed circuit board industry, or what we’ll be saying here, PCBs, for our audience and listeners. Thirty years of experience there.
And then lastly, thinking about industry leadership, being the chairman of the PCBAA, which, by the way, I had the pleasure of keynoting and speaking at last year in my role as the DAS for Manufacturing at the Commerce Department. Shane, that’s where we got a chance to meet, with all the great PCBAA companies that were there. Again, welcome to the show.
Shane Whiteside: Thank you, Alex.
Alex Krutz: All right. Let’s start out really quickly with a little bit about your company. This would be a great opportunity to share with our listeners a little bit about that.
Shane Whiteside: Sure. Our company is Summit Interconnect. We were founded about 10 years ago through acquisitions of two companies in our industry simultaneously. So we launched the name and brand Summit Interconnect after that acquisition.
We’ve grown from the initial two companies in 2016 to a little bit more than eight times our original size, just measured in revenue. We now have seven manufacturing locations, all situated in North America. And we’ve grown to be the largest privately held PCB manufacturer in North America.
Alex Krutz: That’s largest privately held?
Shane Whiteside: Yes, privately. We make printed circuit boards, as you mentioned earlier. Think of printed circuit boards as the green board without the components on it. In all of your electronic appliances that you’ve observed throughout your life, it’s the bare green circuit board.
It’s a product with a lot of manufacturing intensity. You use a lot of raw materials and things like that. We can touch on a little bit more as we go through the discussion on what differentiates PCBs from other types of manufacturing. So we specialize in that.
Think of our business model throughout the industry, including our company, as a build-to-print manufacturer. We don’t innovate our own designs. We work in close partnerships with our customers to build their designs. Our customers consider us to be an extension of their business. They consider us to be their factory.
When I say customers, it’s all the electronic OEMs that you can think of on the Fortune 500. It’s the defense primes in the United States. And basically every electronic device manufacturer, at either the consumer or the infrastructure level, those are our customers. In terms of the company, I think that’s an overview of what we do.
Alex Krutz: I just don’t think that a lot of people really understand. Literally, you could be 10 feet away at any given time from a printed circuit board. That’s how important they are to industry and also consumer electronics, consumer goods, all the things that we use to make things. It’s pretty amazing, the concentration and spread of PCBs throughout all different types of products.
Shane Whiteside: Absolutely. And the PCBs are entirely application specific. There are no standard SKUs. There are no off-the-shelf printed circuit boards. They’re customized for every single application.
For example, your cell phone, depending on the model you have, probably has more than 10 different printed circuit boards, and those specific designs are very specific to that cell phone. They don’t operate anywhere else in any other electronic appliance, and that’s just the nature of our business.
As you said, Alex, PCBs are everywhere. They’re highly customized or application specific, and we have them all in our home, in our pocket, in our car, everywhere.
Alex Krutz: One of the questions that people had asked from my role last year was, “Alex, are we going to make iPhones here again?” There was a lot of discussion about that. Obviously, the president said, “Hey, we’re going to go make iPhones again here.” And you just hit on that, that those PCBs are a critical aspect of that, right?
Shane Whiteside: They certainly are. We’ll talk more about the industry and the global structure and everything, but I think that there are certain things that we enjoy as consumers at low price points that are really enabled by the scale of PCBs and PCB operations in low-cost regions.
But there’s an entirely different category as it relates to national security and what we are really trying to heighten the sensitivity of, what we should be considering secure electronics outside of the scope of, obviously, military and things like that.
Alex Krutz: Well, you’re definitely going to be a beneficiary of that $1.5 trillion budget, that’s for sure.
All right. Let’s get into an industry insight here, Shane. What are people not talking about that they should be? Whether it’s perspective around PCBs in your segment or something more broadly in technology, it would be great to hear your thoughts around what people aren’t talking about but should be.
Shane Whiteside: Sure. The evolution of technologies in printed circuit boards is just a constant. It’s a current that goes forward that we’ve all been working in through our entire career.
But we continue to get to a point as semiconductor process nodes continue to get denser and denser. I don’t know what best-in-class is these days, but sub-nine micron or whatever it is these days. In order to take advantage of that, the pin densities of the interface to the printed circuit boards shrink as well. So that continues to drive our technology globally, but also here in the United States.
I touched on the custom nature of printed circuit boards and the application-specific nature, but we talk a lot about chips and semiconductor foundries and things of that nature. We have to remember that chips don’t float. Chips have to be mounted to a printed circuit board. So all these advancements that we’re making at the chip level have a flow-down effect to advancements that we need to make at the printed circuit board level.
I did touch on this concept of secure electronics. We’ve obviously had an appreciation for a long time about the security of the electronics that help us maintain competitive advantage on the battlefield, electronics that go to the warfighter in various forms.
But now, thinking about national security as it relates to our banking systems, our electrical grid, our cloud storage, all these other things, and now AI, there is a place for consideration of secure electronics that can’t be compromised, that are built here in the United States to support each of those areas.
That’s something that I really think we have had a lot of discussions about through the last couple of years, trying to sensitize folks in Washington, D.C., about this. But I also think that it’s something that would benefit from a much broader discussion and consideration.
Alex Krutz: That’s great. Maybe in our technology section, we can talk drones, AI, energy. We could talk about those in the technology piece and how you see that changing, and how the initiatives by the administration are being carried forward to help our industrial policy and defense industrial base.
But first, I always start, as we start getting into things, with people. Tell us about your team. How do you influence and lead to business objectives? The growth of your business to date over the 10 years, how do you see that with your team and leading them?
Shane Whiteside: Sure. I think our strategic and growth objectives are all very aligned. I noted earlier that we’re a build-to-print manufacturer. So we’re very much a manufacturing partnership model with our customers. Our driving strategic objective is to always be our customers’ best manufacturing partner, and it really starts there.
Best manufacturing partner, to us, means we collaborate with our customers. We’re a great resource for them in their design development. And then, as a manufacturing operation, that we hit our schedule commitments, that we deliver them the highest quality, and, very importantly, that we are their ongoing technology partners in the future, which requires a bit of CapEx and things of that nature. It all starts there.
We’ve formed our team and evolved our team over the last 10 years and got everybody aligned with those objectives. We emphasize a strong alignment between our operations team and our sales team because everybody’s working hand in hand here to help please our customers.
We have an operations organization that’s led by our chief operating officer. We have a sales organization that’s led by his peer, the senior vice president of sales. They work together. Their teams work together every day.
Alex Krutz: That’s a really important piece from a people perspective, your groups working together. We’ve just seen too many times, sales will go out and just get something done, or operations will just go make whatever they want or what’s easy to make and not have a process. So they are very much hand in hand for customer satisfaction.
That’s great. Let’s move into product. You have a great team. We talked a little bit about how they work together in those specific parts of your business. Let’s talk a little bit more about the product, quality, delivery, the design. I know you said that you don’t carry the IP, so that’s something interesting to talk about. Just briefly, how do you receive your designs from your customers, and how do you move forward in that build-to-print manufacturing environment?
Shane Whiteside: That’s a good question. The designs that we receive from our customers are all generally designed around standards that have existed for many years in our industry. There’s a design standard called IPC-2221 that generally guides customers to things like minimum line widths and spacings, pitches between holes, and things of that nature. That’s the basic starting point that provides basic conformity of a design for manufacturability.
We do collaborate with our customers on their more ambitious designs to see where we can create allowances and things of that nature. I noted earlier that we use a lot of very basic materials to start our manufacturing process. Think of a printed circuit board as being several layers of circuitry that are all individually formed and then laminated into a much higher-layer, multilayer package through various manufacturing processes.
We manufacture our product on standard panel sizes. Just like the semiconductor industry uses a 200- or 300-millimeter wafer and then dices chips out at the end, we do something very similar in our manufacturing operations. We’ll take numerous printed circuit boards and step and repeat those onto, say, an 18-inch by 24-inch standard panel that goes through our factory.
We use basic building blocks of copper foil, fiberglass cloth that’s impregnated with resin. We create each one of those layers sequentially in our operation, and then we laminate it together. We drill holes and then plate through those holes to create connectivity between all the layers. We continue to process the boards through final finishing, and then we route out and singulate them at the end, just like dicing a semiconductor chip at the end.
Everything is electrically tested, meticulously inspected, and we emphasize quality at every step in the process. Did that completely answer your question, Alex?
Alex Krutz: Absolutely. Thinking about your product, maybe what would be interesting is from the design to launch manufacturing, what’s your lead time on that? How long does that typically take for a new PCB to get into a certain type of application?
Shane Whiteside: That’s something we love to talk about because we can build circuit boards in as little as 24 hours in some of our operations. Those operations are very closely partnered with our customers that are looking for a design development partner. We call that prototyping. We have certain factories that are very nimble, very fast, and can turn boards very quickly.
Many of our other factories have much higher-complexity work that requires sequential lamination, sequential buildup, things of that nature. So our lead times can be 15 days out to, say, 60 days, depending on the nature of the design that we’re producing.
When we talk about how to be a good manufacturing partner to our customers, having the knowledge and insight about each of those different timelines based on the design, and how they overlay and are going to run in parallel with hundreds of other parts simultaneously in the factory, and being able to start out with an accurate and achievable due date, is very important to us.
Alex Krutz: I think that’s going to be super key, especially as the Department of War goes through its acquisition reform, where it talks about speed and scale versus design and development, which is what we’ve historically done. Being able to print and complete boards in 24 hours, that’s really amazing. Good stuff.
Maybe moving on to process, when you have such detailed manufacturing methods, from soldering and other types of electromechanical work that you do, can you talk to us a little bit about how you improve productivity, your production processes? Maybe a bit on that.
Shane Whiteside: Sure. I touched on scheduling tools and things of that nature. Productivity starts with good, accurate schedules and good information that’s distributed throughout the factory to supplement and inform the goals that we have in each department of the factory.
There’s also a place for automation at many points in our process as well. We talk about physical automation with things like loaders and unloaders. Also, the automation that you don’t see, as we call it, which is some of the information that works in the back. Think of factory of the future, Industry 4.0. That assists us as well.
But we also emphasize workforce development and training, and depth of training, with each of our production operators in our company. Simply training and empowering those workers to understand the specific processes that they work in from all aspects, including, very importantly, the equipment that they’re using, allows each of our departments and production operators to be maximally effective, to be able to troubleshoot their own issues, their own questions, to be able to disposition product, and then keep product moving in the factory.
It’s a journey. It’s always a journey every year. But at the top level, that’s really what we emphasize for productivity improvement.
Alex Krutz: That’s great. I think three key points on that are scheduling, automation, and workforce development. I know that they all go hand in hand. At Patriot Industrial Partners, the consulting firm that I run, scheduling is a big piece as we go into companies. Whether you want to call it S&OP or master scheduling or demand planning or production control, they’re all virtually tied to the same thing, which is how do you take your inputs and how do you execute your outputs most effectively?
I appreciate that. We are in the age of automation and how that workforce development is connected there. I appreciate those comments around that.
Let’s get into some more interesting stuff here, strategy. You’ve been running this business for 10 years, private equity backed. You’ve had clear capitalization from day one. How do you build on that? How do you build on the strategy? Is it evolving? Is it just tweaking? How does a mature business like yours continue to enhance or redevelop its strategy when necessary?
Shane Whiteside: Sure. I think our strategy has to serve the needs of various constituents. We talked a lot about our customers and being the best manufacturing partner for our customers, and I think that’ll be a never-ending strategy. We also have the interests of our shareholders that we need to align with.
Always an emphasis on organic growth, year-over-year growth, and we’ve been very successful in doing that. We’ve been very successful in mergers and acquisitions through the years. We initially formed our company with two acquisitions in 2016, as I mentioned. That gave us an end-to-end product offering across all types of printed circuit boards. Think all things rigid, high-speed digital, flex, and rigid-flex at the initial company founding.
We’ve continued to look for acquisitions that fit that criteria and that also enhanced the product offerings of our platform as well. We did eight acquisitions in our first six years. It was quite an endeavor, but we did it very well and very successfully.
With our first round of investors, our initial backers, which is Oridian Capital Partners in Washington, D.C., we had a very successful run. We’re now partnered with Lindsay Goldberg in New York City. We’ve been partnered with them for over four years now.
It’s been a lot of fun, been very fulfilling, and our strategy has been able to meet the expectations of everybody.
Alex Krutz: That’s great. I tell a lot of people, because we do a lot of work with private equity groups, the value creation, when done right, there’s extensive value creation that’s done by private equity groups. I think that there’s sometimes a misnomer that it’s all bad, and it’s not. They do a lot of great stuff.
I think your company’s a success story of it, really since its founding. Having the right private equity backers that let operators like you go and get stuff done, and then really put the right capital and support behind you and your team, is a great success story. Definitely like to highlight that.
All right. Let’s move into technology. It would be great to hear two perspectives, what technology is going to change your industry? And I’d really like to get from you, we hear a lot about NVIDIA and all the different AI and quantum computing. It would be great to hear a little bit about technology and how it changes your industry, but also more broadly where technology is going. It would be great to get your inside perspective on that.
Shane Whiteside: Sure. Again, the evolution of technology is largely driven by the chipsets that we talked about earlier. The densification of those chipsets, where they interface with the printed circuit board, drives increasing density and circuit density over time. How that manifests itself depends on the application.
For defense applications where the form factor is fixed, the X-Y dimensions are going to be that way forever, the technology will drive sequential processing increases. More what we call blind and buried vias, but more subassemblies that have to be created that are then relaminated together to build a higher-layer stack and more functionality within the circuit board to take advantage of those increased chip densities.
For AI applications that you talked about a little bit earlier, that really drives up layer count, just aggregate layer count in the circuit board. Many of these are 60 to north of 100 layers.
Quantum computing is generally quite different material sets fundamentally than we’re using now, just because of the operating temperatures of quantum computers. Each one of those has its own technology path, and they’re all a little bit unique.
But the two that I spoke about, defense applications and also AI, because of the shifting trends, have the effect of changing our capacity utilization in certain areas of the factory. When we talk about sequentially laminated product, the middle of our factories tends to get much busier. When we talk about the AI application, the front end of our factories, where we create inner layers, all of those layers, tends to get much busier.
The evolution of technology trends across all those platforms has the effect of creating a capital utilization mismatch and imbalance across each factory that we can address with CapEx strategies in some cases. But with the demand signals that we’re starting to see throughout our industry, it’s really necessitating new factory builds here at this point.
Alex Krutz: That’s great. All right. Wrapping up here, let’s talk industrial policy, because your company has been at the forefront of reshoring. It would be great to talk about the percentage of PCBs that we manufacture here in the U.S. and those policies, whether it’s America First Trade Policy or other executive orders or other industrial policies that have been implemented in years past. Can you talk to us a little bit about your thoughts around that and where you see industry going?
Shane Whiteside: Absolutely. Printed circuit boards were invented in America in the 1950s. It was invented here, really grew here initially. When I first joined this industry in the ’90s, it peaked out at the end of the ’90s. We were 25% of global production in the United States, and it was a $40 billion market.
As we move forward to 2026, it’s an $80 billion total production market, but unfortunately, the United States only serves about 4% of that. Our industry output has shrunk from $10 billion in 2000 down to about $3.5 billion at the end of 2025.
Alex Krutz: That’s amazing. The industry’s doubled, and we’ve done a reduction of almost 37% of our contribution to that.
Shane Whiteside: Yes. We’ve really been affected by low-cost region migration through that period that I noted. There is a very high labor content in what we produce because of all the sequential processing. Our basic production traveler for the simplest jobs is about 25 to 30 process steps sequentially. So we are really building up material.
We do have a large staff, and the downside of that, it does make us more vulnerable to low-cost region competition during those years. But we do see demand picking back up on its own.
In terms of industrial policy, we formed the Printed Circuit Board Association of America over five years ago. We started with five founding members, and we now have 90 members. These are members not just printed circuit board manufacturers, but our customers, both EMS and OEM customers, our supply chain partners. These are all American companies or companies that otherwise have operations in America that really are aligned with our mission to educate, advocate, and ultimately legislate improvements in the market, in our industry, to the benefit of our industrial base that produces printed circuit boards.
We’ve gotten legislation introduced in three successive Congresses in the House. Currently, it’s H.R. 3597. It’s called the PCBs Act, Protecting Circuit Boards and Substrates Act. That bill proposes a 25% tax credit on U.S.-produced PCBs. It also proposes $3 billion in funding for industry expansion through the Defense Production Act.
Just a note on the Defense Production Act. President Biden in 2022 basically made a presidential determination that the U.S. printed circuit board industry was a critical national security asset and eligible for funding under the Defense Production Act. There have been awards in prior years for new factory construction. Our House bill, which now has a companion bill in the Senate, is aimed to codify that into law.
That’s something that I think we’ve been very successful in doing as PCBAA. Membership continues to grow every year, and our reach and our advocacy continue to be more effective every year. I’m very proud to be associated with the PCBAA since day one.
Alex Krutz: That’s great. I appreciate that, and I think we should do a follow-up sometime next year where you could hopefully come back and say, “Alex, the U.S. industry is at 6% now.” So we can double that output, and hopefully Summit Interconnect can be leading the charge on that.
It’s great to hear, even though we’ve talked in the past, I didn’t realize that you and your team had been so instrumental in that PCB legislation, which is really, really great to hear. I think that’s going to be tremendous for the industry, especially with the tax credit. That’s going to be a lot of incentive when we talk about reshoring and those processes that we want to make sure are made in America.
Shane, I really appreciate you taking the time here and joining me on The Factory Doctor podcast. It’s great to have thoughtful, educated, highly motivated CEOs like you on this. Again, thank you for joining the show, and we’ll talk to you soon.
Shane Whiteside: Great. Thank you, Alex. It was a pleasure to be here. Great talking with you.




Comments